GLX70012V-PV

Featured

Showing all 38 results

  • 0 out of 5

    GLX70012V-PV

    $2,765.00
    Add to cart
    Quick View
  • 0 out of 5

    SE-20 Solar Tracking Alignment Laser System

    $4,995.00

    The SE-20 Solar Tracking Alignment Laser System mounts to the slew motor pedestal and shoots both directions to provide a laser reference datum line for positioning the solar panel support and rotation bearings.  This means that all the bearings are aligned concentric to the slew motor center of rotation. The SE-20 works in all weather, all angles of alignment and at distances over 500’.

    Add to cart
    Quick View
  • 0 out of 5

    DAYLIGHT GLX LASER DOCKING SYSTEM™

    $1,654.00$2,172.00

    This is why Laser Tools Co.’s Daylight GLX Laser Docking System™ is the perfect trailer docking assistant. A driver can “see” the laser docking lines in his wing mirrors when the truck and trailer are approaching the docking lane.

    • Eye safe, visible laser guide lights are viewed in the driver’s wing mirrors.
    • The laser guide lights can be seen over 150 feet away in direct sunlight.
    • The back of the trailer can be centered between the laser guide lights.
    • Laser guide lines are still viewable on the ramp or tarmac in low light, rain, snow, mud, or overcast conditions.
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    SE-10 Solar Energy Installation System

    $2,495.00$4,700.00

    The Solar Energy Installation System is a kit that consists of the model GLX350-10 Green Laser Technology Alignment Laser, the AP351- Set of 1” Clamps, an AP353A Magnetic Dovetail Base Mount and the AP1000 Tripod Leveling Adaptor Plate. Accessories are listed below the Operation instructions.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    85 LX Series Sheave Alignment System

    $842.00

    The LX Series Sheave Alignment series minimizes belt, sheave and motor bearing were by using “Positive Tracking” during belt alignment.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    GLX100M 10MX Laser Precision Level with Green Beam

    $820.00

    New Brighter, direct drive GREEN laser diode
    “This means more power and more reliability”.

    Add to cart
    Quick View
  • 0 out of 5

    High Powered Pathway Laser Systems

    $736.00$826.00

    Use for Walkways, Forklift Guidance, Overhead Crane Exclusion zones, Warehouse Aisle Management, Safety Zones and Freight Docking Systems.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L58DRL Center Point Alignment Laser

    $312.00

    The L58DRL Center Point Alignment Laser is used for locating the center of rotation of spindles and arbors including drill presses, lathes, mills, turning centers, collets and pneumatic feeds.

    Add to cart
    Quick View
  • 0 out of 5

    LASER SYSTEMS for CRANE INDUSTRY

    $1,376.00$4,660.00

    • Safety – You can outline the Derrick and Trolley with laser light. This creates a “Safe Zone” under the hoist.  • Inspection – Periodic inspections and routine maintenance are performed faster and more accurate with a laser reference line.  • Alignment – You can show the exact lifting point under the block hook with a laser crosshair. This centers the trolley over the load every time.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L56-PT | GL56-PT INTRINSICALLY SAFE LASER POINTERS

    $395.00$495.00

    Exceeds UL Class 1, Division I or Division II Certification Standards

    ■ 10 Times Brighter!
    ■ IP67 Waterproof
    ■ Hard Anodized Case

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    AP1550 Rail Alignment Kit for 2,000 ft. Alignments

    $4,660.00

    SAFETY – You can outline the Derrick and Trolley with laser light. This creates a “Safe Zone” under the hoist. INSPECTION – Periodic inspections and routine maintenance are performed faster and more accurate with a laser reference line. ALIGNMENT – You can show the exact lifting point under the block hook with a laser cross hair. This centers the trolley over the load every time.

    Add to cart
    Quick View
  • 0 out of 5

    GLX58BAC-30 & GLX58BDC-30 Green Beam Industrial Alignment Modules

    $630.00$942.00

    Our newest GLX58BAC-30 & GLX58BDC-30 Green Beam Industrial Alignment Modules is a very powerful 30mW line laser.  Projects a brilliant, visible line instead of a dot.  The brightest of our module available for industrial application and extremely economically priced. This produce a brighter laser line for use in marking, measuring and layouts.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    GLX60AC & GLX60DC High Powered Laser Modules

    $895.00$1,095.00

    Our newest GLX60AC & GLX60DC Green Beam Industrial Alignment Modules is a very powerful 500mW and 1W line laser.  Projects a brilliant, visible line instead of a dot.  The brightest of our module available for industrial application and extremely economically priced. This produce a brighter laser line for use in marking, measuring and layouts.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    GLX58SAC-LINE 30 MILLIWATT LASER MODULE

    $495.00$895.00

    Our newest GLX58SAC-Line is a very powerful 30mW line laser.  Projects a brilliant, visible line instead of a dot.  The brightest of our module available for industrial application and extremely economically priced. This produce a brighter laser line for use in marking, measuring and layouts.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    LED Strobe – MSHA Approved

    $508.00$1,526.00

    Each strobe flashes bright LEDs every few seconds. Light can be seen over 100 feet down a tunnel or a mine shaft. The color of the light indicates your position, so you’ll always know where you are in the mine.

    12 Strobes units per case.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    Super LED Strobe – MSHA Approved

    $763.00$2,734.00

    Used for In-By and Out-By directional indicators, SCSR re-breather and secure containment markers, survey markers and rescue team identifiers including back pack and rescue sled flashers. You can mark Permissible entry points with different colors and provide beacons for hazardous machinery conditions.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    AP96 HARD MOUNT SYSTEM

    $1,155.00

    The Hard Mount system will hold Mining Alignment Lasers firmly in place underground during production coal mining operations, hard rock mining and active tunnel excavations. Vibration and ventilation can cause slight movements of the alignment laser if it’s mounted using standard roof spads. But this system uses rock bolts and anchors to affix the laser firmly to the roof or rib.

    Add to cart
    Quick View
  • 0 out of 5

    Underwater Laser Systems for Observation, Measurement & Survey

    $1,054.00$1,325.00

    Underwater Lasers are intended to be used by ROVs (Remote Operate Vehicles) using video images to take general measurements.   By paralleling two laser beams that are calibrated for set distances, accurate measurements from video images are possible.

    The Sea Beam Laser™ attachment for ROV systems is a plug and play measurement device that can be attached or removed from the vehicle in seconds.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    THE SEA BEAM UNDERWATER LASER™

    $2,114.00$2,915.00

    Underwater Lasers are intended to be used by ROVs (Remote Operate Vehicles) using video images to take general measurements.   By paralleling two laser beams that are calibrated for set distances, accurate measurements from video images are possible.

    The Sea Beam Laser™ attachment for ROV systems is a plug and play measurement device that can be attached or removed from the vehicle in seconds.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L56SS Bar Feeder System

    $1,204.00

    The L56SS Bar Feeder Alignment System uses a straight beam of laser light and two targets to center and position a bar feeder carriage at the right height to automatically supply bar stock material to a lathe spindle. The alignment of the center of the bar to the center of the spindle is critical because the bar stock is automatically pushed or fed into the lathe’s spindle in order to begin the machining process.

    Add to cart
    Quick View
  • 0 out of 5

    GLX600AC Dual Beam Laser Kit

    $1,054.00$1,160.00

    The AP185A Beam Shaper™ works along with the AP185B Beam Shifter™ to move the intensity of the laser light along the line. This means that you can evenly illuminate the laser line when the laser module is pointing at the working surface at an angle.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L600 Laser Crosshair Line Generator

    $583.00$906.00

    This dual beam line generator system is used for marking, positioning, aligning; establishing orientation and aiming. The L600 Crosshair Line Generator is industrial tough and loaded with extras. This is a perfect use for any manufacturing and product assembly and highly recommended for alignment and registration applications.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L350 MSHA Mining Alignment Laser System

    $1,014.00$2,952.00

    Used in above ground and underground operations. The Model L350 is rock steady, extremely rugged and uses 12.5mm optics for a small dot size at distance.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L59 and GL59 Industrial Alignment Module

    $466.00$797.00
    • 12mm Diameter Optics – Shoots a tight beam over 1,000 feet.
    • Solid Brass – Won´t spark or rust.
    • All Glass Optics – Will remain visible in smoke, rain or oily environments.
    • Dot size smaller than a “Dime” at 100 feet – Viewable in direct sunlight.
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    GL80 Green Laser Technology Sheave Alignment System

    $1,356.00$2,640.00

    A good sheave alignment laser system will increase efficiency by reducing premature wear or failure of pulleys, belts and bearings. There are several different alignment methods, such as the labor intensive string and straighthedge method, however, laser alignment seems the more accurate. This will greatly reduce downtime and manpower needed to do the alignment. This results in increased production uptime and great labor savings.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L80 Sheave Alignment System

    $1,054.00$2,070.00

    Align sheaves, belts, platforms, conveyors and soft motor mounts. Works with belt, gear and roller transmission systems too! The flat Laser Line can also be used as a level layout reference. The Model L80 Sheave Alignment System includes: PowerLine© Pulley Alignment tool with Laser Beam accuracy, 3 adjustable targets, and hard shell carrying case.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L58 and GL58 Precision Concentric Alignment Lasers

    $422.00$551.00

    This is the perfect tool for projecting a point of reference for an exact measurement. It’s used in industrial and commercial applications including manufacturing and assembly operations.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L56, GLX56 & GL56 MSHA Certified Concentric Alignment Lasers

    $630.00$2,062.00

    These industrial systems are used to align, aim, and position parts and machinery using eye visible laser beams for reference. Used in hazardous environments, saw mills, CNC machines to align bar feeders, industrial plants, marine work, R&D labs, and laser line applications, these modules are extremely reliable and multi-functioned.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L58SAC Industrial Alignment Laser

    $312.00$466.00

    Improper equipment geometry can result in the loss of production time. Our 58 Series Alignment Lasers are used to align, aim, and position parts amd machinery to instantly and accurately measure X-Y deviation at any point along the line up to 300 feet long.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L50M Laser Micro Level™ Hand Level

    $302.00$312.00
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    GL50XP XTREME PERFORMANCE Laser Micro Level

    $614.00

    Professional contractors and avid DIY experts rely on precision laser tools for faster and more consistent operation. The Model L100M series MX Laser Precision Level™ is our top-selling precision level equipment. This portable device includes a built-in laser that improves user-visibility and project accuracy.

    Add to cart
    Quick View
  • 0 out of 5

    L50XP Laser Micro Level

    $312.00$614.00

    Professional contractors and avid DIY experts rely on precision laser tools for faster and more consistent operation. The Model L100M series MX Laser Precision Level™ is our top-selling precision level equipment. This portable device includes a built-in laser that improves user-visibility and project accuracy.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L100M MX Laser Precision Level

    $431.00$2,256.00

    The Model L100M only needs a single operator to complete any leveling jobs. It’s easy to setup and requires virtually no additional assistance. This is the perfect tool for independent contractors who require working with pinpoint accuracy.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L202 Dual Beam Alignment Laser

    $948.00$2,336.00
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L700 MSHA Dual Beam Mining Alignment Laser

    $1,441.00$3,442.00

    MSHA Approved – Certified for use in hazardous environments esp. Methane-Air Mixtures

    Dual Beam, 2 eye visible laser beams shoot in opposite directions. Includes adjustable spad hanging tabs & 6 “AA” size Batteries Solid Brass. Dimensions 20 “L x 1” Dia

    Available in Red Laser and Green Laser Technology

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    GL350 MSHA Mining Alignment Laser

    $1,303.00$4,748.00

    MSHA Approved – Certified for use in hazardous environments esp. Methane-Air Mixtures.

    Green Laser Technology™ Alignment Laser (For use in non-gaseous environments). Includes adjustable spad hanging tabs and 2 “D” size Batteries. Solid Brass.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    L355X Long Distance Alignment Laser

    $1,616.00$2,952.00

    The L355X MSHA has all the great features of the L350 Alignment Laser, but will shoot a laser beam over 2 Miles! Includes and 10 mW, 635 nm CircuLaser™ laser diode system.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    HB59 Steel Enclosure

    $95.00

    “The Laser shoots out of the side of the box!” Use indoors and outdoors on cranes, gantries, security installations, loading docks, machinery and conveyors.

    Add to cart
    Quick View
Top
X