AP36 Vibration Dampening System / AP35 Support Bracket

Accessories

Showing all 30 results

  • 0 out of 5

    AP36 Vibration Dampening System / AP35 Support Bracket

    $250.00$280.00

    AP36 Vibration Dampening System – Minimizes Laser Beam Drift when driving piles into the ground.

    AP35 Support Bracket – Mount the laser to the pile with an offset so the laser beam is not blocked by refusals. Can be used with the AP1000 Leveling Adapter Plate.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    AP90D Beam Bender™

    $185.00
    Add to cart
    Quick View
  • 0 out of 5

    BE9V 9V Battery Eliminator for GLX350-10 Alignment Laser

    $350.00

    BE9V Battery Eliminator replaced 6AA batteries in the GLX350-10 Alignment Laser.

    Add to cart
    Quick View
  • 0 out of 5

    GDT200 & GDT250 Green Retro-Reflective Magnetic Target

    $85.00$175.00
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    SPS-30 Solar Power System with BE9V Battery Eliminator

    $540.00

    The SPS-30 Solar Power System converts sunlight into 12V DC power. This powers the GL350-10 Green Beam Solar Energy System Alignment System Laser.

    Add to cart
    Quick View
  • 0 out of 5

    ColorGage™ Target System

    $69.00

    ColorGage™ alignment targets use enhanced reflective and fluorescent technology so that the laser adjustment lines can be viewed in direct sunlight.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    LDM 150 Laser Tape™ Laser Distance Measurement Tool

    $265.00

    One button operation gives you long distance readings between two points that are accurate to 1/16 of an inch.

    Add to cart
    Quick View
  • 0 out of 5

    AP93 Tri-Beam Bender™

    $528.00

    This is used to split the laser beam into three directions for precise layouts

    • Used for 90° Header and Break alignments
    • Can be positioned anywhere along the beam’s path for fixed 90° turns and adjustable turns from 75° to 105°
    Add to cart
    Quick View
  • 0 out of 5

    AP96 HARD MOUNT SYSTEM

    $1,155.00

    The Hard Mount system will hold Mining Alignment Lasers firmly in place underground during production coal mining operations, hard rock mining and active tunnel excavations. Vibration and ventilation can cause slight movements of the alignment laser if it’s mounted using standard roof spads. But this system uses rock bolts and anchors to affix the laser firmly to the roof or rib.

    Add to cart
    Quick View
  • 0 out of 5

    AP1500 Mounting System

    $2,120.00
    Add to cart
    Quick View
  • 0 out of 5

    AP1600 Tripod Mounting System

    $2,215.00
    Add to cart
    Quick View
  • 0 out of 5

    GL1000 Line Generator

    $102.00

    Built in Line Generator – 6° Divergent beam angle – 10′ line @100′

    Add to cart
    Quick View
  • 0 out of 5

    DT180 & DT200 Translucent Magnetic Targets

    $47.00$62.00
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    WP59 Fine Beam Steering Optics

    $422.00

    Precisely positions laser beam within +/- 10° of beam movement.  +/- 2° beam movement optional.

    Add to cart
    Quick View
  • 0 out of 5

    WP58 Fine Beam Steering Optics

    $185.00

    Simple Operation “Rotate for Beam Adjustment” +/- 2° Beam Movement.  Optional +/- 10° Beam Movement.

    Add to cart
    Quick View
  • 0 out of 5

    AP90C Beam Bender™

    $164.00

    The AP90C Beam Bender™ attaches to all Lasers and creates two laser beams that are exactly 90° apart.  This means that right angle layouts can be done LASER FAST and LASER ACCURATE!

    Add to cart
    Quick View
  • 0 out of 5

    AP40 Hardshell Carrying Case

    $58.00

    The AP40 Hardshell Carrying Case is blow molded and foam filled to offer premium protection and storage space for all your laser levels and accessories. Each compartment is designed to hold secure an individual accessory or laser level. This carrying case will keep your laser leveling system together and safe. No more worry about lost time on the job looking for the right tool.

    Add to cart
    Quick View
  • 0 out of 5

    AP30 Carrying Case

    $47.00
    Add to cart
    Quick View
  • 0 out of 5

    AP185B Beam Shifter Plate™

    $217.00

    The AP185A Beam Shaper™ works along with the AP185B Beam Shifter Plate™ to move the intensity of the laser light along the line. This means that you can evenly illuminate the laser line when the laser module is pointing at the working surface at an angle.

    Add to cart
    Quick View
  • 0 out of 5

    AP180C Beam Spreader™

    $159.00

    Rotates 360°. Draw any angle of reference. The AP180C changes the laser dot into a laser line. Accurate 90° reference. Used with all Laser Hand Level models (works best with the L100M MX Laser Precision Level). The length and width of the laser line will vary in relation to the distance and the angle of the beam spreader to the surface the laser line is shinning upon.

    Add to cart
    Quick View
  • 0 out of 5

    AP15 & AP16 Aperture Pack

    $58.00

    Used for lowering laser beam’s intensity and reshaping the beam to 1/16″, 3/32″ or 1/8″ Diameters. Works with all L50, L56 and L58 style laser tools.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    HB59 Steel Enclosure

    $95.00

    “The Laser shoots out of the side of the box!” Use indoors and outdoors on cranes, gantries, security installations, loading docks, machinery and conveyors.

    Add to cart
    Quick View
  • 0 out of 5

    AP354 Dovetail Mounting with Magnetic Base

    $85.00

    Dovetail mounting with magnetic base. Use for survey and drill layouts.

    Add to cart
    Quick View
  • 0 out of 5

    AP353 Magnetic Dovetail Guide & Mounting Base Plate

    $86.00$215.00
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    AP351 Removable Ring Set

    $110.00

    1″ Ring Set (2) (Use w/ AP1500 mounting system)

    Add to cart
    Quick View
  • 0 out of 5

    AP202 Magnetic Support Bracket

    $105.00

    Use with L600 or L202 Dual Beam Alignment Laser and working Spads.

    Add to cart
    Quick View
  • 0 out of 5

    AP100A Leveling Adapter Plate

    $250.00

    The AP100A LEVELING ADAPTER PLATE provides a stable base that supports the L100M MX Laser Precision Level™, L50M Laser Micro Level™ or L25 Laser Handy Line™ for stand alone operation.

    Add to cart
    Quick View
  • 0 out of 5

    The AP1000 Transit Adapter Plate

    $1,695.00

    The AP1000 Transit Adapter Plate is a laser mounting system that provides precise adjustments in both horizontal and vertical axis. Site layouts in 360° increments, layout measurements, general survey readings and slope & grade shots can be done more precisely even with only one person.

    Add to cart
    Quick View
  • 0 out of 5

    AP94 Adjustable Mounting Bracket

    $58.00$180.00
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
  • 0 out of 5

    Laser Line Generator Optics

    $90.00$302.00

    When using the L58 Style Laser Dot Generator, choose the correct Line Generator Optic to create the appropriate line length for your need. A cylindrical lens is a round bar or cross section of glass through which the collimated laser light passes and then spreads into a fan beam to form a line.

    Select options This product has multiple variants. The options may be chosen on the product page
    Quick View
Top
X