Showing all 36 results
-
SE-20 Solar Tracking Alignment Laser System
$4,995.00Quick ViewThe SE-20 Solar Tracking Alignment Laser System mounts to the slew motor pedestal and shoots both directions to provide a laser reference datum line for positioning the solar panel support and rotation bearings. This means that all the bearings are aligned concentric to the slew motor center of rotation. The SE-20 works in all weather, all angles of alignment and at distances over 500’.
-
SE-10 Solar Energy Installation System
$2,495.00 – $4,700.00Quick ViewThe Solar Energy Installation System is a kit that consists of the model GLX350-10 Green Laser Technology Alignment Laser, the AP351- Set of 1” Clamps, an AP353A Magnetic Dovetail Base Mount and the AP1000 Tripod Leveling Adaptor Plate. Accessories are listed below the Operation instructions.
-
LASER SYSTEMS for CRANE INDUSTRY
$1,376.00 – $4,660.00Quick View• Safety – You can outline the Derrick and Trolley with laser light. This creates a “Safe Zone” under the hoist. • Inspection – Periodic inspections and routine maintenance are performed faster and more accurate with a laser reference line. • Alignment – You can show the exact lifting point under the block hook with a laser crosshair. This centers the trolley over the load every time.
-
AP1550 Rail Alignment Kit for 2,000 ft. Alignments
$4,660.00Quick ViewSAFETY – You can outline the Derrick and Trolley with laser light. This creates a “Safe Zone” under the hoist. INSPECTION – Periodic inspections and routine maintenance are performed faster and more accurate with a laser reference line. ALIGNMENT – You can show the exact lifting point under the block hook with a laser cross hair. This centers the trolley over the load every time.
-
GLX58BAC-30 & GLX58BDC-30 Green Beam Industrial Alignment Modules
$630.00 – $942.00Quick ViewOur newest GLX58BAC-30 & GLX58BDC-30 Green Beam Industrial Alignment Modules is a very powerful 30mW line laser. Projects a brilliant, visible line instead of a dot. The brightest of our module available for industrial application and extremely economically priced. This produce a brighter laser line for use in marking, measuring and layouts.
-
GLX60AC & GLX60DC High Powered Laser Modules
$895.00 – $1,095.00Quick ViewOur newest GLX60AC & GLX60DC Green Beam Industrial Alignment Modules is a very powerful 500mW and 1W line laser. Projects a brilliant, visible line instead of a dot. The brightest of our module available for industrial application and extremely economically priced. This produce a brighter laser line for use in marking, measuring and layouts.
-
GLX58SAC-LINE 30 MILLIWATT LASER MODULE
$495.00 – $895.00Quick ViewOur newest GLX58SAC-Line is a very powerful 30mW line laser. Projects a brilliant, visible line instead of a dot. The brightest of our module available for industrial application and extremely economically priced. This produce a brighter laser line for use in marking, measuring and layouts.
-
Super LED Strobe – MSHA Approved
$763.00 – $2,734.00Quick ViewUsed for In-By and Out-By directional indicators, SCSR re-breather and secure containment markers, survey markers and rescue team identifiers including back pack and rescue sled flashers. You can mark Permissible entry points with different colors and provide beacons for hazardous machinery conditions.
-
Underwater Laser Systems for Observation, Measurement & Survey
$1,054.00 – $1,325.00Quick ViewUnderwater Lasers are intended to be used by ROVs (Remote Operate Vehicles) using video images to take general measurements. By paralleling two laser beams that are calibrated for set distances, accurate measurements from video images are possible.
The Sea Beam Laser™ attachment for ROV systems is a plug and play measurement device that can be attached or removed from the vehicle in seconds.
-
THE SEA BEAM UNDERWATER LASER™
$2,114.00 – $2,915.00Quick ViewUnderwater Lasers are intended to be used by ROVs (Remote Operate Vehicles) using video images to take general measurements. By paralleling two laser beams that are calibrated for set distances, accurate measurements from video images are possible.
The Sea Beam Laser™ attachment for ROV systems is a plug and play measurement device that can be attached or removed from the vehicle in seconds.
-
L56SS Bar Feeder System
$1,204.00Quick ViewThe L56SS Bar Feeder Alignment System uses a straight beam of laser light and two targets to center and position a bar feeder carriage at the right height to automatically supply bar stock material to a lathe spindle. The alignment of the center of the bar to the center of the spindle is critical because the bar stock is automatically pushed or fed into the lathe’s spindle in order to begin the machining process.
-
GLX600AC Dual Beam Laser Kit
$1,054.00 – $1,160.00Quick ViewThe AP185A Beam Shaper™ works along with the AP185B Beam Shifter™ to move the intensity of the laser light along the line. This means that you can evenly illuminate the laser line when the laser module is pointing at the working surface at an angle.
-
L600 Laser Crosshair Line Generator
$583.00 – $906.00Quick ViewThis dual beam line generator system is used for marking, positioning, aligning; establishing orientation and aiming. The L600 Crosshair Line Generator is industrial tough and loaded with extras. This is a perfect use for any manufacturing and product assembly and highly recommended for alignment and registration applications.
-
L59 and GL59 Industrial Alignment Module
$466.00 – $797.00Quick View- 12mm Diameter Optics – Shoots a tight beam over 1,000 feet.
- Solid Brass – Won´t spark or rust.
- All Glass Optics – Will remain visible in smoke, rain or oily environments.
- Dot size smaller than a “Dime” at 100 feet – Viewable in direct sunlight.
-
GL80 Green Laser Technology Sheave Alignment System
$1,356.00 – $2,640.00Quick ViewA good sheave alignment laser system will increase efficiency by reducing premature wear or failure of pulleys, belts and bearings. There are several different alignment methods, such as the labor intensive string and straighthedge method, however, laser alignment seems the more accurate. This will greatly reduce downtime and manpower needed to do the alignment. This results in increased production uptime and great labor savings.
-
L80 Sheave Alignment System
$1,054.00 – $2,070.00Quick ViewAlign sheaves, belts, platforms, conveyors and soft motor mounts. Works with belt, gear and roller transmission systems too! The flat Laser Line can also be used as a level layout reference. The Model L80 Sheave Alignment System includes: PowerLine© Pulley Alignment tool with Laser Beam accuracy, 3 adjustable targets, and hard shell carrying case.
-
L56, GLX56 & GL56 MSHA Certified Concentric Alignment Lasers
$630.00 – $2,062.00Quick ViewThese industrial systems are used to align, aim, and position parts and machinery using eye visible laser beams for reference. Used in hazardous environments, saw mills, CNC machines to align bar feeders, industrial plants, marine work, R&D labs, and laser line applications, these modules are extremely reliable and multi-functioned.
-
L58SAC Industrial Alignment Laser
$312.00 – $466.00Quick ViewImproper equipment geometry can result in the loss of production time. Our 58 Series Alignment Lasers are used to align, aim, and position parts amd machinery to instantly and accurately measure X-Y deviation at any point along the line up to 300 feet long.
-
GL50XP XTREME PERFORMANCE Laser Micro Level
$614.00Quick ViewProfessional contractors and avid DIY experts rely on precision laser tools for faster and more consistent operation. The Model L100M series MX Laser Precision Level™ is our top-selling precision level equipment. This portable device includes a built-in laser that improves user-visibility and project accuracy.
-
L50XP Laser Micro Level
$312.00 – $614.00Quick ViewProfessional contractors and avid DIY experts rely on precision laser tools for faster and more consistent operation. The Model L100M series MX Laser Precision Level™ is our top-selling precision level equipment. This portable device includes a built-in laser that improves user-visibility and project accuracy.
-
L100M MX Laser Precision Level
$431.00 – $2,256.00Quick ViewThe Model L100M only needs a single operator to complete any leveling jobs. It’s easy to setup and requires virtually no additional assistance. This is the perfect tool for independent contractors who require working with pinpoint accuracy.
-
L700 MSHA Dual Beam Mining Alignment Laser
$1,441.00 – $3,442.00Quick ViewMSHA Approved – Certified for use in hazardous environments esp. Methane-Air Mixtures
Dual Beam, 2 eye visible laser beams shoot in opposite directions. Includes adjustable spad hanging tabs & 6 “AA” size Batteries Solid Brass. Dimensions 20 “L x 1” Dia
Available in Red Laser and Green Laser Technology
-
GL350 MSHA Mining Alignment Laser
$1,303.00 – $4,748.00Quick ViewMSHA Approved – Certified for use in hazardous environments esp. Methane-Air Mixtures.
Green Laser Technology™ Alignment Laser (For use in non-gaseous environments). Includes adjustable spad hanging tabs and 2 “D” size Batteries. Solid Brass.
