Showing all 69 results
-
AP36 Vibration Dampening System / AP35 Support Bracket
$250.00 – $280.00Quick ViewAP36 Vibration Dampening System – Minimizes Laser Beam Drift when driving piles into the ground.
AP35 Support Bracket – Mount the laser to the pile with an offset so the laser beam is not blocked by refusals. Can be used with the AP1000 Leveling Adapter Plate.
-
SE-20 Solar Tracking Alignment Laser System
$4,995.00Quick ViewThe SE-20 Solar Tracking Alignment Laser System mounts to the slew motor pedestal and shoots both directions to provide a laser reference datum line for positioning the solar panel support and rotation bearings. This means that all the bearings are aligned concentric to the slew motor center of rotation. The SE-20 works in all weather, all angles of alignment and at distances over 500’.
-
DAYLIGHT GLX LASER DOCKING SYSTEM™
$1,654.00 – $2,172.00Quick ViewThis is why Laser Tools Co.’s Daylight GLX Laser Docking System™ is the perfect trailer docking assistant. A driver can “see” the laser docking lines in his wing mirrors when the truck and trailer are approaching the docking lane.
- Eye safe, visible laser guide lights are viewed in the driver’s wing mirrors.
- The laser guide lights can be seen over 150 feet away in direct sunlight.
- The back of the trailer can be centered between the laser guide lights.
- Laser guide lines are still viewable on the ramp or tarmac in low light, rain, snow, mud, or overcast conditions.
-
SE-10 Solar Energy Installation System
$2,495.00 – $4,700.00Quick ViewThe Solar Energy Installation System is a kit that consists of the model GLX350-10 Green Laser Technology Alignment Laser, the AP351- Set of 1” Clamps, an AP353A Magnetic Dovetail Base Mount and the AP1000 Tripod Leveling Adaptor Plate. Accessories are listed below the Operation instructions.
-
SPEARGUN LASER SIGHT
$395.00 – $495.00Quick ViewUse with Band, Roller or Pneumatic Spearguns for precise aiming in open water, reef or structure fishing. The Speargun Laser Sight projects a bright laser dot at the point of impact for improved head shots, deflection takes and long distance penetration.
-
Speargun Sea Reel™ Kit
$250.00Quick ViewThe Sea Reel™ Automatic Speargun reel is suitable for both Pneumatic and Band style spearguns. The reel is mounted to the speargun using tie wraps or stainless-steel screws provided and the shaft slide is slid over the shaft behind the flopper. Two 8mm I.D. Bushings, a Recoil Spring and a Rivet are provided for assembly.
-
LASER SYSTEMS for CRANE INDUSTRY
$1,376.00 – $4,660.00Quick View• Safety – You can outline the Derrick and Trolley with laser light. This creates a “Safe Zone” under the hoist. • Inspection – Periodic inspections and routine maintenance are performed faster and more accurate with a laser reference line. • Alignment – You can show the exact lifting point under the block hook with a laser crosshair. This centers the trolley over the load every time.
-
AP1550 Rail Alignment Kit for 2,000 ft. Alignments
$4,660.00Quick ViewSAFETY – You can outline the Derrick and Trolley with laser light. This creates a “Safe Zone” under the hoist. INSPECTION – Periodic inspections and routine maintenance are performed faster and more accurate with a laser reference line. ALIGNMENT – You can show the exact lifting point under the block hook with a laser cross hair. This centers the trolley over the load every time.
-
GLX58BAC-30 & GLX58BDC-30 Green Beam Industrial Alignment Modules
$630.00 – $942.00Quick ViewOur newest GLX58BAC-30 & GLX58BDC-30 Green Beam Industrial Alignment Modules is a very powerful 30mW line laser. Projects a brilliant, visible line instead of a dot. The brightest of our module available for industrial application and extremely economically priced. This produce a brighter laser line for use in marking, measuring and layouts.
-
GLX60AC & GLX60DC High Powered Laser Modules
$895.00 – $1,095.00Quick ViewOur newest GLX60AC & GLX60DC Green Beam Industrial Alignment Modules is a very powerful 500mW and 1W line laser. Projects a brilliant, visible line instead of a dot. The brightest of our module available for industrial application and extremely economically priced. This produce a brighter laser line for use in marking, measuring and layouts.
-
GLX58SAC-LINE 30 MILLIWATT LASER MODULE
$495.00 – $895.00Quick ViewOur newest GLX58SAC-Line is a very powerful 30mW line laser. Projects a brilliant, visible line instead of a dot. The brightest of our module available for industrial application and extremely economically priced. This produce a brighter laser line for use in marking, measuring and layouts.
-
Super LED Strobe – MSHA Approved
$763.00 – $2,734.00Quick ViewUsed for In-By and Out-By directional indicators, SCSR re-breather and secure containment markers, survey markers and rescue team identifiers including back pack and rescue sled flashers. You can mark Permissible entry points with different colors and provide beacons for hazardous machinery conditions.
-
AP96 HARD MOUNT SYSTEM
$1,155.00Quick ViewThe Hard Mount system will hold Mining Alignment Lasers firmly in place underground during production coal mining operations, hard rock mining and active tunnel excavations. Vibration and ventilation can cause slight movements of the alignment laser if it’s mounted using standard roof spads. But this system uses rock bolts and anchors to affix the laser firmly to the roof or rib.
-
Underwater Laser Systems for Observation, Measurement & Survey
$1,054.00 – $1,325.00Quick ViewUnderwater Lasers are intended to be used by ROVs (Remote Operate Vehicles) using video images to take general measurements. By paralleling two laser beams that are calibrated for set distances, accurate measurements from video images are possible.
The Sea Beam Laser™ attachment for ROV systems is a plug and play measurement device that can be attached or removed from the vehicle in seconds.
-
THE SEA BEAM UNDERWATER LASER™
$2,114.00 – $2,915.00Quick ViewUnderwater Lasers are intended to be used by ROVs (Remote Operate Vehicles) using video images to take general measurements. By paralleling two laser beams that are calibrated for set distances, accurate measurements from video images are possible.
The Sea Beam Laser™ attachment for ROV systems is a plug and play measurement device that can be attached or removed from the vehicle in seconds.
-
L56SS Bar Feeder System
$1,204.00Quick ViewThe L56SS Bar Feeder Alignment System uses a straight beam of laser light and two targets to center and position a bar feeder carriage at the right height to automatically supply bar stock material to a lathe spindle. The alignment of the center of the bar to the center of the spindle is critical because the bar stock is automatically pushed or fed into the lathe’s spindle in order to begin the machining process.
-
GLX600AC Dual Beam Laser Kit
$1,054.00 – $1,160.00Quick ViewThe AP185A Beam Shaper™ works along with the AP185B Beam Shifter™ to move the intensity of the laser light along the line. This means that you can evenly illuminate the laser line when the laser module is pointing at the working surface at an angle.
-
L600 Laser Crosshair Line Generator
$583.00 – $906.00Quick ViewThis dual beam line generator system is used for marking, positioning, aligning; establishing orientation and aiming. The L600 Crosshair Line Generator is industrial tough and loaded with extras. This is a perfect use for any manufacturing and product assembly and highly recommended for alignment and registration applications.
-
L59 and GL59 Industrial Alignment Module
$466.00 – $797.00Quick View- 12mm Diameter Optics – Shoots a tight beam over 1,000 feet.
- Solid Brass – Won´t spark or rust.
- All Glass Optics – Will remain visible in smoke, rain or oily environments.
- Dot size smaller than a “Dime” at 100 feet – Viewable in direct sunlight.
-
GL80 Green Laser Technology Sheave Alignment System
$1,356.00 – $2,640.00Quick ViewA good sheave alignment laser system will increase efficiency by reducing premature wear or failure of pulleys, belts and bearings. There are several different alignment methods, such as the labor intensive string and straighthedge method, however, laser alignment seems the more accurate. This will greatly reduce downtime and manpower needed to do the alignment. This results in increased production uptime and great labor savings.
-
L80 Sheave Alignment System
$1,054.00 – $2,070.00Quick ViewAlign sheaves, belts, platforms, conveyors and soft motor mounts. Works with belt, gear and roller transmission systems too! The flat Laser Line can also be used as a level layout reference. The Model L80 Sheave Alignment System includes: PowerLine© Pulley Alignment tool with Laser Beam accuracy, 3 adjustable targets, and hard shell carrying case.
-
L56, GLX56 & GL56 MSHA Certified Concentric Alignment Lasers
$630.00 – $2,062.00Quick ViewThese industrial systems are used to align, aim, and position parts and machinery using eye visible laser beams for reference. Used in hazardous environments, saw mills, CNC machines to align bar feeders, industrial plants, marine work, R&D labs, and laser line applications, these modules are extremely reliable and multi-functioned.
-
L58SAC Industrial Alignment Laser
$312.00 – $466.00Quick ViewImproper equipment geometry can result in the loss of production time. Our 58 Series Alignment Lasers are used to align, aim, and position parts amd machinery to instantly and accurately measure X-Y deviation at any point along the line up to 300 feet long.
-
GL50XP XTREME PERFORMANCE Laser Micro Level
$614.00Quick ViewProfessional contractors and avid DIY experts rely on precision laser tools for faster and more consistent operation. The Model L100M series MX Laser Precision Level™ is our top-selling precision level equipment. This portable device includes a built-in laser that improves user-visibility and project accuracy.
-
L50XP Laser Micro Level
$312.00 – $614.00Quick ViewProfessional contractors and avid DIY experts rely on precision laser tools for faster and more consistent operation. The Model L100M series MX Laser Precision Level™ is our top-selling precision level equipment. This portable device includes a built-in laser that improves user-visibility and project accuracy.
-
L100M MX Laser Precision Level
$431.00 – $2,256.00Quick ViewThe Model L100M only needs a single operator to complete any leveling jobs. It’s easy to setup and requires virtually no additional assistance. This is the perfect tool for independent contractors who require working with pinpoint accuracy.
-
L700 MSHA Dual Beam Mining Alignment Laser
$2,745.00 – $3,745.00Quick ViewMSHA Approved – Certified for use in hazardous environments esp. Methane-Air Mixtures
Dual Beam, 2 eye visible laser beams shoot in opposite directions. Includes adjustable spad hanging tabs & 6 “AA” size Batteries Solid Brass. Dimensions 20 “L x 1” Dia
Available in Red Laser and Green Laser Technology
-
GL350 MSHA Mining Alignment Laser
$1,986.00 – $4,748.00Quick ViewMSHA Approved – Certified for use in hazardous environments esp. Methane-Air Mixtures.
Green Laser Technology™ Alignment Laser (For use in non-gaseous environments). Includes adjustable spad hanging tabs and 2 “D” size Batteries. Solid Brass.
-
AP40 Hardshell Carrying Case
$58.00Quick ViewThe AP40 Hardshell Carrying Case is blow molded and foam filled to offer premium protection and storage space for all your laser levels and accessories. Each compartment is designed to hold secure an individual accessory or laser level. This carrying case will keep your laser leveling system together and safe. No more worry about lost time on the job looking for the right tool.
-
AP185B Beam Shifter Plate™
$217.00Quick ViewThe AP185A Beam Shaper™ works along with the AP185B Beam Shifter Plate™ to move the intensity of the laser light along the line. This means that you can evenly illuminate the laser line when the laser module is pointing at the working surface at an angle.
-
AP180C Beam Spreader™
$159.00Quick ViewRotates 360°. Draw any angle of reference. The AP180C changes the laser dot into a laser line. Accurate 90° reference. Used with all Laser Hand Level models (works best with the L100M MX Laser Precision Level). The length and width of the laser line will vary in relation to the distance and the angle of the beam spreader to the surface the laser line is shinning upon.
-
The AP1000 Transit Adapter Plate
$1,695.00Quick ViewThe AP1000 Transit Adapter Plate is a laser mounting system that provides precise adjustments in both horizontal and vertical axis. Site layouts in 360° increments, layout measurements, general survey readings and slope & grade shots can be done more precisely even with only one person.
-
Laser Line Generator Optics
$90.00 – $302.00Quick ViewWhen using the L58 Style Laser Dot Generator, choose the correct Line Generator Optic to create the appropriate line length for your need. A cylindrical lens is a round bar or cross section of glass through which the collimated laser light passes and then spreads into a fan beam to form a line.
