-
AP36 Vibration Dampening System / AP35 Support Bracket
$250.00 – $280.00AP36 Vibration Dampening System – Minimizes Laser Beam Drift when driving piles into the ground.
AP35 Support Bracket – Mount the laser to the pile with an offset so the laser beam is not blocked by refusals. Can be used with the AP1000 Leveling Adapter Plate.
-
-
BE9V 9V Battery Eliminator for GLX350-10 Alignment Laser
$350.00BE9V Battery Eliminator replaced 6AA batteries in the GLX350-10 Alignment Laser.
-
-
SPS-30 Solar Power System with BE9V Battery Eliminator
$540.00The SPS-30 Solar Power System converts sunlight into 12V DC power. This powers the GL350-10 Green Beam Solar Energy System Alignment System Laser.
-
ColorGage™ Target System
$69.00ColorGage™ alignment targets use enhanced reflective and fluorescent technology so that the laser adjustment lines can be viewed in direct sunlight.
-
LDM 150 Laser Tape™ Laser Distance Measurement Tool
$265.00One button operation gives you long distance readings between two points that are accurate to 1/16 of an inch.
-
AP93 Tri-Beam Bender™
$528.00This is used to split the laser beam into three directions for precise layouts
-
Used for 90° Header and Break alignments
-
Can be positioned anywhere along the beam’s path for fixed 90° turns and adjustable turns from 75° to 105°
-
-
AP96 HARD MOUNT SYSTEM
$1,155.00The Hard Mount system will hold Mining Alignment Lasers firmly in place underground during production coal mining operations, hard rock mining and active tunnel excavations. Vibration and ventilation can cause slight movements of the alignment laser if it’s mounted using standard roof spads. But this system uses rock bolts and anchors to affix the laser firmly to the roof or rib.
-
-
-
-
-
WP59 Fine Beam Steering Optics
$422.00Precisely positions laser beam within +/- 10° of beam movement. +/- 2° beam movement optional.
-
WP58 Fine Beam Steering Optics
$185.00Simple Operation “Rotate for Beam Adjustment” +/- 2° Beam Movement. Optional +/- 10° Beam Movement.
-
AP90C Beam Bender™
$164.00The AP90C Beam Bender™ attaches to all Lasers and creates two laser beams that are exactly 90° apart. This means that right angle layouts can be done LASER FAST and LASER ACCURATE!
-
AP40 Hardshell Carrying Case
$58.00The AP40 Hardshell Carrying Case is blow molded and foam filled to offer premium protection and storage space for all your laser levels and accessories. Each compartment is designed to hold secure an individual accessory or laser level. This carrying case will keep your laser leveling system together and safe. No more worry about lost time on the job looking for the right tool.
-
-
AP185B Beam Shifter Plate™
$217.00The AP185A Beam Shaper™ works along with the AP185B Beam Shifter Plate™ to move the intensity of the laser light along the line. This means that you can evenly illuminate the laser line when the laser module is pointing at the working surface at an angle.
-
AP180C Beam Spreader™
$159.00Rotates 360°. Draw any angle of reference. The AP180C changes the laser dot into a laser line. Accurate 90° reference. Used with all Laser Hand Level models (works best with the L100M MX Laser Precision Level). The length and width of the laser line will vary in relation to the distance and the angle of the beam spreader to the surface the laser line is shinning upon.
-
AP15 & AP16 Aperture Pack
$58.00Used for lowering laser beam’s intensity and reshaping the beam to 1/16″, 3/32″ or 1/8″ Diameters. Works with all L50, L56 and L58 style laser tools.
-
HB59 Steel Enclosure
$127.00“The Laser shoots out of the front or side of the box!” Use indoors and outdoors on cranes, gantries, security installations, loading docks, machinery and conveyors.
-
AP354 Dovetail Mounting with Magnetic Base
$85.00Dovetail mounting with magnetic base. Use for survey and drill layouts.
-
-
-
AP202 Magnetic Support Bracket
$105.00Use with L600 or L202 Dual Beam Alignment Laser and working Spads.
-
AP100A Leveling Adapter Plate
$250.00The AP100A LEVELING ADAPTER PLATE provides a stable base that supports the L100M MX Laser Precision Level™, L50M Laser Micro Level™ or L25 Laser Handy Line™ for stand alone operation.
-
The AP1000 Transit Adapter Plate
$1,695.00The AP1000 Transit Adapter Plate is a laser mounting system that provides precise adjustments in both horizontal and vertical axis. Site layouts in 360° increments, layout measurements, general survey readings and slope & grade shots can be done more precisely even with only one person.
-
-
Laser Line Generator Optics
$90.00 – $302.00When using the L58 Style Laser Dot Generator, choose the correct Line Generator Optic to create the appropriate line length for your need. A cylindrical lens is a round bar or cross section of glass through which the collimated laser light passes and then spreads into a fan beam to form a line.
