GLX58BAC-30 & GLX58BDC-30
Green Beam Industrial Alignment Modules

The GLX58BAC-30 and GLX58BDC-30 30mW Green Beam Industrial Alignment Modules use the AP185A Beam Spreader™ to create an even intensity distribution line. This line has the same uniform width over the entire line length. This means that longer lengths can be covered and used for measurements and positioning. When the laser line is shining onto a surface at a low angle, the GLX58BAC-SYS30 or GLX58BDC-SYS30 is recommended. These laser models use the adjustable AP185B Beam Spreader™ which shifts the light intensity along the laser line so more light is projected farther away from the laser module. This results in a evenly illuminated laser line over longer distances. This is useful for cutting tables, shears and breaks, long conveyors, walkways and layouts.

Optional: Substitute Model AP185A Beam Spreader™ with 60° Adjustable Line Generator Lens Assembly.

• You can have an evenly illuminated line even if you shine the laser light at an angle to the working surface.
• You can adjust the intensity spread by rotating the front lens assembly.
• International Power Supply

Introducing the
GLX Green Light Laser Systems

Model GLX58BAC-30
Includes:

• 30mW of power at 515nm – The laser beam is 50 times brighter.
• The 60° AP185A Beam Shaper™ draws an even intensity laser line – You can use the whole length of the line for measuring and reference.
• -20°C to 60°C temperature range – Use the laser in Hot or Cold conditions.
• AP94 Mounting bracket and “L” Bracket
• Beam on Indicator: Sealed Jeweled Ball on side of case

Model GLX58BAC-SYS30
Includes:

• 30mW of power at 515nm – The beam is 50 times brighter.
• The AP185A Beam Shaper™ draws an even intensity laser line – You can use the whole length of the line for measuring and reference.
• AP185B Beam Shifter™ moves the intensity along that line – The laser line is evenly illuminated when the laser is shining at an angle to the surface.
• -20°C to 60°C temperature range – Use the laser in Hot or Cold conditions.
• AP94 Mounting bracket and “L” Bracket
• Beam on Indicator: Sealed Jeweled Ball on side of case

Options Include:

• Options include: 80mW, 50mW or 10mW upgrade
• Class II, <1mW power output optional
• Class IIIb <500mW power output optional
• 10° or 30° Divergent Line Generator Lens

DOWNLOAD PDF #1
DOWNLOAD PDF #2
DOWNLOAD PDF #3

Introducing the
AP185A Beam Spreader™

Normal lines have tapered ends and straight middle sections.

Even intensity lines spread the light evenly along the line.

The AP185A Beam Spreader™ distributes the light evenly along the line or spreads the light back and forth along the line.