Showing all 11 results
-
AP36 Vibration Dampening System / AP35 Support Bracket
$250.00 – $530.00Quick ViewAP36 Vibration Dampening System – Minimizes Laser Beam Drift when driving piles into the ground.
AP35 Support Bracket – Mount the laser to the pile with an offset so the laser beam is not blocked by refusals. Can be used with the AP1000 Leveling Adapter Plate.
-
SE-20 Solar Tracking Alignment Laser System
$4,995.00Quick ViewThe SE-20 Solar Tracking Alignment Laser System mounts to the slew motor pedestal and shoots both directions to provide a laser reference datum line for positioning the solar panel support and rotation bearings. This means that all the bearings are aligned concentric to the slew motor center of rotation. The SE-20 works in all weather, all angles of alignment and at distances over 500’.
-
DAYLIGHT GLX LASER DOCKING SYSTEM™
$1,654.00 – $2,172.00Quick ViewThis is why Laser Tools Co.’s Daylight GLX Laser Docking System™ is the perfect trailer docking assistant. A driver can “see” the laser docking lines in his wing mirrors when the truck and trailer are approaching the docking lane.
- Eye safe, visible laser guide lights are viewed in the driver’s wing mirrors.
- The laser guide lights can be seen over 150 feet away in direct sunlight.
- The back of the trailer can be centered between the laser guide lights.
- Laser guide lines are still viewable on the ramp or tarmac in low light, rain, snow, mud, or overcast conditions.
-
SE-10 Solar Energy Installation System
$2,495.00 – $4,700.00Quick ViewThe Solar Energy Installation System is a kit that consists of the model GLX350-10 Green Laser Technology Alignment Laser, the AP351- Set of 1” Clamps, an AP353A Magnetic Dovetail Base Mount and the AP1000 Tripod Leveling Adaptor Plate. Accessories are listed below the Operation instructions.
-
LASER SYSTEMS for CRANE INDUSTRY
$1,376.00 – $4,660.00Quick View• Safety – You can outline the Derrick and Trolley with laser light. This creates a “Safe Zone” under the hoist. • Inspection – Periodic inspections and routine maintenance are performed faster and more accurate with a laser reference line. • Alignment – You can show the exact lifting point under the block hook with a laser crosshair. This centers the trolley over the load every time.
-
AP96 HARD MOUNT SYSTEM
$1,155.00Quick ViewThe Hard Mount system will hold Mining Alignment Lasers firmly in place underground during production coal mining operations, hard rock mining and active tunnel excavations. Vibration and ventilation can cause slight movements of the alignment laser if it’s mounted using standard roof spads. But this system uses rock bolts and anchors to affix the laser firmly to the roof or rib.
-
THE SEA BEAM UNDERWATER LASER™
$2,114.00 – $2,915.00Quick ViewUnderwater Lasers are intended to be used by ROVs (Remote Operate Vehicles) using video images to take general measurements. By paralleling two laser beams that are calibrated for set distances, accurate measurements from video images are possible.
The Sea Beam Laser™ attachment for ROV systems is a plug and play measurement device that can be attached or removed from the vehicle in seconds.
