DAYLIGHT GLX LASER DOCKING SYSTEM™

Industrial Laser Products

Showing all 29 results

  • 0 out of 5

    DAYLIGHT GLX LASER DOCKING SYSTEM™

    $1,654.00$2,172.00

    This is why Laser Tools Co.’s Daylight GLX Laser Docking System™ is the perfect trailer docking assistant. A driver can “see” the laser docking lines in his wing mirrors when the truck and trailer are approaching the docking lane.

    • Eye safe, visible laser guide lights are viewed in the driver’s wing mirrors.
    • The laser guide lights can be seen over 150 feet away in direct sunlight.
    • The back of the trailer can be centered between the laser guide lights.
    • Laser guide lines are still viewable on the ramp or tarmac in low light, rain, snow, mud, or overcast conditions.
    Select options
    Quick View
  • 0 out of 5

    85 LX Series Sheave Alignment System

    $842.00

    The LX Series Sheave Alignment series minimizes belt, sheave and motor bearing were by using “Positive Tracking” during belt alignment.

    Select options
    Quick View
  • 0 out of 5

    L58DRL Center Point Alignment Laser

    $312.00

    The L58DRL Center Point Alignment Laser is used for locating the center of rotation of spindles and arbors including drill presses, lathes, mills, turning centers, collets and pneumatic feeds.

    Add to cart
    Quick View
  • 0 out of 5

    LASER SYSTEMS for CRANE INDUSTRY

    $1,376.00$2,395.00

    • Safety – You can outline the Derrick and Trolley with laser light. This creates a “Safe Zone” under the hoist.  • Inspection – Periodic inspections and routine maintenance are performed faster and more accurate with a laser reference line.  • Alignment – You can show the exact lifting point under the block hook with a laser crosshair. This centers the trolley over the load every time.

    Select options
    Quick View
  • 0 out of 5

    AP1550 Rail Alignment Kit for 2,000 ft. Alignments

    $2,938.00

    SAFETY – You can outline the Derrick and Trolley with laser light. This creates a “Safe Zone” under the hoist. INSPECTION – Periodic inspections and routine maintenance are performed faster and more accurate with a laser reference line. ALIGNMENT – You can show the exact lifting point under the block hook with a laser cross hair. This centers the trolley over the load every time.

    Add to cart
    Quick View
  • 0 out of 5

    GLX58BAC-30 & GLX58BDC-30 Green Beam Industrial Alignment Modules

    $630.00$942.00

    Our newest GLX58BAC-30 & GLX58BDC-30 Green Beam Industrial Alignment Modules is a very powerful 30mW line laser.  Projects a brilliant, visible line instead of a dot.  The brightest of our module available for industrial application and extremely economically priced. This produce a brighter laser line for use in marking, measuring and layouts.

    Select options
    Quick View
  • 0 out of 5

    GLX60AC & GLX60DC High Powered Laser Modules

    $895.00$1,095.00

    Our newest GLX60AC & GLX60DC Green Beam Industrial Alignment Modules is a very powerful 500mW and 1W line laser.  Projects a brilliant, visible line instead of a dot.  The brightest of our module available for industrial application and extremely economically priced. This produce a brighter laser line for use in marking, measuring and layouts.

    Select options
    Quick View
  • 0 out of 5

    GLX58SAC-LINE 30 MILLIWATT LASER MODULE

    $495.00$895.00

    Our newest GLX58SAC-Line is a very powerful 30mW line laser.  Projects a brilliant, visible line instead of a dot.  The brightest of our module available for industrial application and extremely economically priced. This produce a brighter laser line for use in marking, measuring and layouts.

    Select options
    Quick View
  • 0 out of 5

    L56SS Bar Feeder System

    $1,204.00

    The L56SS Bar Feeder Alignment System uses a straight beam of laser light and two targets to center and position a bar feeder carriage at the right height to automatically supply bar stock material to a lathe spindle. The alignment of the center of the bar to the center of the spindle is critical because the bar stock is automatically pushed or fed into the lathe’s spindle in order to begin the machining process.

    Add to cart
    Quick View
  • 0 out of 5

    GLX600AC Dual Beam Laser Kit

    $1,054.00$1,160.00

    The AP185A Beam Shaper™ works along with the AP185B Beam Shifter™ to move the intensity of the laser light along the line. This means that you can evenly illuminate the laser line when the laser module is pointing at the working surface at an angle.

    Select options
    Quick View
  • 0 out of 5

    L600 Laser Crosshair Line Generator

    $583.00$906.00

    This dual beam line generator system is used for marking, positioning, aligning; establishing orientation and aiming. The L600 Crosshair Line Generator is industrial tough and loaded with extras. This is a perfect use for any manufacturing and product assembly and highly recommended for alignment and registration applications.

    Select options
    Quick View
  • 0 out of 5

    L59 and GL59 Industrial Alignment Module

    $466.00$797.00
    • 12mm Diameter Optics – Shoots a tight beam over 1,000 feet.
    • Solid Brass – Won´t spark or rust.
    • All Glass Optics – Will remain visible in smoke, rain or oily environments.
    • Dot size smaller than a “Dime” at 100 feet – Viewable in direct sunlight.
    Select options
    Quick View
  • 0 out of 5

    GL80 Green Laser Technology Sheave Alignment System

    $1,356.00$2,640.00

    A good sheave alignment laser system will increase efficiency by reducing premature wear or failure of pulleys, belts and bearings. There are several different alignment methods, such as the labor intensive string and straighthedge method, however, laser alignment seems the more accurate. This will greatly reduce downtime and manpower needed to do the alignment. This results in increased production uptime and great labor savings.

    Select options
    Quick View
  • 0 out of 5

    L80 Sheave Alignment System

    $1,054.00$2,070.00

    Align sheaves, belts, platforms, conveyors and soft motor mounts. Works with belt, gear and roller transmission systems too! The flat Laser Line can also be used as a level layout reference. The Model L80 Sheave Alignment System includes: PowerLine© Pulley Alignment tool with Laser Beam accuracy, 3 adjustable targets, and hard shell carrying case.

    Select options
    Quick View
  • 0 out of 5

    L58 and GL58 Precision Concentric Alignment Lasers

    $422.00$551.00

    This is the perfect tool for projecting a point of reference for an exact measurement. It’s used in industrial and commercial applications including manufacturing and assembly operations.

    Select options
    Quick View
  • 0 out of 5

    L58SAC Industrial Alignment Laser

    $312.00$466.00

    Improper equipment geometry can result in the loss of production time. Our 58 Series Alignment Lasers are used to align, aim, and position parts amd machinery to instantly and accurately measure X-Y deviation at any point along the line up to 300 feet long.

    Select options
    Quick View
  • 0 out of 5

    GL1000 Line Generator

    $102.00

    Built in Line Generator – 6° Divergent beam angle – 10′ line @100′

    Add to cart
    Quick View
  • 0 out of 5

    WP59 Fine Beam Steering Optics

    $422.00

    Precisely positions laser beam within +/- 10° of beam movement.  +/- 2° beam movement optional.

    Add to cart
    Quick View
  • 0 out of 5

    WP58 Fine Beam Steering Optics

    $185.00

    Simple Operation “Rotate for Beam Adjustment” +/- 2° Beam Movement.  Optional +/- 10° Beam Movement.

    Add to cart
    Quick View
  • 0 out of 5

    AP90C Beam Bender™

    $164.00

    The AP90C Beam Bender™ attaches to all Lasers and creates two laser beams that are exactly 90° apart.  This means that right angle layouts can be done LASER FAST and LASER ACCURATE!

    Add to cart
    Quick View
  • 0 out of 5

    AP40 Hardshell Carrying Case

    $58.00

    The AP40 Hardshell Carrying Case is blow molded and foam filled to offer premium protection and storage space for all your laser levels and accessories. Each compartment is designed to hold secure an individual accessory or laser level. This carrying case will keep your laser leveling system together and safe. No more worry about lost time on the job looking for the right tool.

    Add to cart
    Quick View
  • 0 out of 5

    AP30 Carrying Case

    $47.00
    Add to cart
    Quick View
  • 0 out of 5

    AP185B Beam Shifter Plate™

    $217.00

    The AP185A Beam Shaper™ works along with the AP185B Beam Shifter Plate™ to move the intensity of the laser light along the line. This means that you can evenly illuminate the laser line when the laser module is pointing at the working surface at an angle.

    Add to cart
    Quick View
  • 0 out of 5

    AP180C Beam Spreader™

    $159.00

    Rotates 360°. Draw any angle of reference. The AP180C changes the laser dot into a laser line. Accurate 90° reference. Used with all Laser Hand Level models (works best with the L100M MX Laser Precision Level). The length and width of the laser line will vary in relation to the distance and the angle of the beam spreader to the surface the laser line is shinning upon.

    Add to cart
    Quick View
  • 0 out of 5

    AP15 & AP16 Aperture Pack

    $58.00

    Used for lowering laser beam’s intensity and reshaping the beam to 1/16″, 3/32″ or 1/8″ Diameters. Works with all L50, L56 and L58 style laser tools.

    Select options
    Quick View
  • 0 out of 5

    HB59 Steel Enclosure

    $95.00

    “The Laser shoots out of the side of the box!” Use indoors and outdoors on cranes, gantries, security installations, loading docks, machinery and conveyors.

    Add to cart
    Quick View
  • 0 out of 5

    AP202 Magnetic Support Bracket

    $105.00

    Use with L600 or L202 Dual Beam Alignment Laser and working Spads.

    Add to cart
    Quick View
  • 0 out of 5

    AP94 Adjustable Mounting Bracket

    $58.00$180.00
    Select options
    Quick View
  • 0 out of 5

    Laser Line Generator Optics

    $90.00$302.00

    When using the L58 Style Laser Dot Generator, choose the correct Line Generator Optic to create the appropriate line length for your need. A cylindrical lens is a round bar or cross section of glass through which the collimated laser light passes and then spreads into a fan beam to form a line.

    Select options
    Quick View
Top
X